Restoring a Schröder Apperate SXFI/10

I have two of these fully mechanical electric time switches. They need to be manually rewound and do not have a motor. Out of these this one was broken and the rust pattern looked absolutely atrocious, so I decided to restore this one and keep the other in vintage condition.

Rusty SXFI/10

Fixing the clockwork

The main spring rusted through around the mounting point I remounted it by heating it up and bending it into shape.

Pictures before the repair, I didn’t take any after I remounted the spring. You can see where it tor off on the right picture. I fixed it by wrapping it around the post as was originally the case

I also lubricated the gears a little bit, they are coarse enough to be lubricated with normal precision mechanics oil and shouldn’t require specialized watch oil. (Though some people may disagree…)

A new knob

The opening knob for the switch pin positioning and rewinding was extremely corroded, so I figured to make a new one on the lathe.

Lathe pressing a grip pattern into brass New knob

New paint

I originally spray painted it with silver hammer paint, but found it to be too bright by comparison to how it probably appeared originally. So I applied another coat of dark-silver hammer paint.

Done

Restored and original SXFI/10 Here the restored one by comparison to the other one I have that is still in original condition

Contents